RSM-SY8 Ultra Sonic Pile Integrity CT Imaging Tester

 Application

Ø Acoustic pile tomography detection by transmission method

Ø Acoustic pile integrity detection by transmission method

Ø Concrete crack depth detection

Ø Concrete strength detection by ultrasonic-rebound combined method

Ø Longitudinal wave velocity test of rock mass in geological investigation

Ø Detection of loosen zone of tunnel rock mass

Ø Test of dynamic and elasticity parameters of non-metallic materials

Ø Integrity detection of underground diaphragm wall

Applicable standards

Ø Standard Test Method for Integrity Testing of Concrete Deep Foundation by Ultrasonic Crosshole Testing ASTM D6760-08

Ø Technical Code for Detection of Building Foundation Pile JGJ 106-2014

Ø Dynamic Testing Technology Regulations on Highway Engineering Foundation Pile JTG/T F81-01-2004 

Ø Nondestructive Detection Code for Railway Engineering Foundation Pile TB 10218-2008

Ø Technical Regulations on Concrete Strength Detection by Ultrasonic-Rebound Combined Method CECS 02:2005

Ø Technical Regulations on Concrete Defect Detection by Ultrasonic Method CECS 21:2000

Ø Regulations on Concrete Strength Detection of Railway Engineering Structure TB 10426-2004

Detection Code for Building Foundation in Guangdong Province DBJ 15-60-2008

Features

1?Super-large high-definition LCD screen display and built-in high-performance dual-core processor;

2?4 pipes and 6 profiles (6 times of flat detection and 12 times of oblique detection) can be collected at most in a single lifting, and the size, range and specific location determination of the whole pile defect can be displayed in real time;

3?The professional pile three-dimensional CT imaging software is provided and it can make the testing results generate various types of three-dimensional dynamic diagrams, accurately locate the defect and provide the significant basis for the coring and other follow-up supplementary verification;

4?The automatic counting and lifting device can be connected conveniently and quickly and the maximum lifting speed can reach 60 m/min;

5?Using the engineering plastic shell, the instrument is beautiful and durable with solid structure and light weight;

6?imported connectors are used and the complete machine is equipped with waterproof design;

7?Removable lithium battery is provided, desktop charger is supported and spare battery can be provided to ensure that the field work will not be interrupted;

8?The minimum resolution of lifting depth is 1cm.

9?Using the embedded system, it can start up and shut down rapidly and resist the viruses.

Core Advantages

l Domestic initiative rapid field CT

Scanning speed: ≥10 cycles/sec;

Left-hand figure (+description together with the interface on the instrument):

Eighteen profiles can be tested in a single lifting intuitively and accurately and the size, range and specific location determination of the whole pile defect can be displayed in real time;

The maximum lifting speed can reach 60m/min; the minimum resolution of lifting depth is 1cm

l Professional pile three-dimensional CT imaging software

It can make the testing results generate various types of three-dimensional dynamic diagrams, accurately locate the defect and provide the significant basis for the coring and other follow-up supplementary verification

l Removable lithium battery

Long standby, support desktop charger; the battery can be easily changed and will work without interruption at the field

Specification

Model	RSM-SY8
Master control form	Low power embedded system    Basic frequency: 1GHz    Memory: 512M
Sampling method	Channel multiplexing self-transmitting and self-receiving
Display mode	12.1-inch high-brightness true-color LCD screen
Operation method	Touch screen
Storage mode	16G electronic hard disk
Communication  method	Wired communication
Depth counting method	Automatic counting
Scanning speed	≥10 cycles/sec
Trigger method	Signal trigger
Sampling interval	0.1?200μS
Recording length	0.5?4k
Transmit voltage	500V/1000V adjustable
Dynamic range	≥100dB
Gain accuracy	0.5dB
Transmit channel	Four
Number of receiving channels	Eight
Number of profiles tested in a single lifting	Eighteen profiles
Transmit pulse width	1-100μS continuously adjustable
Frequency bandwidth	1?500kHz
Acoustic amplitude accuracy	≤3%
Acoustic time accuracy	≤0.5%
Receiving sensitivity	≤10μV
Intertrack crosstalk	≤1/400
Data export	USB
Data uploading mode	Wifi
Operating temperature	-20?+55?
Power supply mode	Removable lithium battery≥10h
Dimensions	340×270×73mm
Weight	2.0kg (including lithium battery)
Lifting device
Connection method of lifting device	Wired/wireless
Wireless transmission distance	30m
Wireless working hours	≥20h
Minimum space between  testing points	1cm
Maximum lifting speed	60m/min
Counting method	Double direction counting

 

Standard Configuration

No.	Name	Quantity	Remarks
1	Host	1
2	Double-transmitting and double-receiving cross-hole probe	4	Optionally select four probes from these three types (50m/70m/100m) (including four wire coils)
3	One-transmitting and one-receiving cross-hole probe	4	Optionally select four probes from these three types (50m/70m/100m) (including four wire coils)
4	Depth counter and  connecting cable	1	Including 10m cable
5	Flat probe and connecting cable	2	50KHz, including 5m calbe
6	pipe orifice pulleys	4
7	Power adapter	1
8	U disk	1
9	Stylus pen	1
10	Instrument and accessories container	2
11	Tripod	1
12	CT tomography software	1	Including softdog