Product Name: Emsf-231UV-T and Emsf-232UV-T One-Component UV Light Curing Adhesive Model NO.: EMSF-231UV-T Color: Yellow Composition: Organic Material Characteristic: Waterproof Main Agent Composition: Thermosetting Resin Application: Automobile, Construction, Fiber & Garment Morphology: Water-Soluble Bonding Function: Liquid Sealing Leak Used: LED Part Bonding Viscosity: 300 Positioning Time: 2-3s Hardness: 75D Shear Force: 12.65MPa Trademark: electroloy Origin: China/Malaysia/India HS Code: 2924199090 Product Description electroloy They are also one-component UV light-curing adhesives, both of which are highly transparentBrightness, the hardened resin has properties such as toughness and resistance to cold and heat shock. These two products are particularly suitable for fixing and bonding glass to glass.EMSF-231UV-T is suitable for the bonding of small-area glass, while EMSF-232UV-T has more significant adhesion and is suitable for bonding of large-area glass.This product has the following characteristics:1. UV fast curing, 2. Low odor and good protective performance 3, low viscosity and easy sizing 4.Excellent adhesion to glass 5.After curing, the colloid is strong, with shock absorption and thermal shock resistance. 6, aging resistance, radiation resistance, ozone corrosion resistance and other properties 7.Excellent waterproof performanceThe main uses of this product:1.Crystal bonding in crystal technology 2.Glassware bonding3. Bonding of glass craftsProduct image presentation:Technical Parameters:Conformal Coating ( Silicone )Product nameViscosity (mPa.s)Tack free timeApplication fieldsEMSF 31130015minProtection for PCBAEMSF 313100020minInstructions:1. Clean the surface of the substrate to be glued. If there is water or detergent remaining on the surface after cleaning, you need to blow dry or wipe it or wait for it to dry completely before gluing.2. Put (glue) the glue evenly on one of the substrates and place it on the glue, and then squeeze it out to squeeze out air bubbles and level the glue. Make sure that the glued parts are covered with glue and fixed in position.3. Use a cloth or paper towel to wipe off the excess glue around the glass plastic. Before this step, try not to let the glue touch the ultraviolet rays. Do not wet the paper liquid with a damp cloth until the glue is fully cured.4. Irradiate with a UV light with a wavelength of 365 nanometers until the adhesive layer is fully cured. When the ultraviolet lamp is as close to the glue as possible during irradiation, the curing speed can be accelerated.5. After curing by ultraviolet irradiation, if there is still overflowing glue around the glass, it can be scraped off carefully with a blade.Precautions:1.The ideal adhesive layer thickness when bonding is 0.01-0.05mm, too thin or too thick will affect the bonding performance.2. Make sure that the adhesive layer absorbs sufficient UV energy to achieve the best curing effect, otherwise it will easily affect the adhesive performance of the adhesive layer.3.Do not move the glass back and forth during UV irradiation, otherwise it will easily cause the adhesive layer to become white and the bonding strength to decrease.4.The remaining glue should not be returned to the original packaging.It should be stored at room temperature away from light and kept out of the reach of children.Storage:Stored in a dark, sealed, ventilated and cool place, the ideal storage temperature is 8-28 ° C.Validity period: 6 months