Product Name: Emsa 209/ Emsa 209X/Emsa 357 Automobile Part or Electrical Components or LED Part Bonding General Adhesive Model NO.: EMSA 209 Color: Yellow Composition: Organic Material Characteristic: Waterproof Main Agent Composition: Thermosetting Resin Classification: PCB LED Material: Resin Application: Automobile, Construction, Fiber & Garment Morphology: Water-Soluble Bonding Function: Liquid Sealing Leak Used: LED Part Bonding Viscosity: 300 Positioning Time: 2-3s Hardness: 75D Shear Force: 12.65MPa Trademark: electroloy Origin: China/Malaysia/India HS Code: 2924199090 Product Description electroloy EMSA 209/EMSA 209x/EMSA 357 is a light yellow transparent one-component UV curing adhesive. The adhesive is highly transparent. The hardened resin has properties such as toughness and resistance to cold and heat. It is used for fixing and bonding between glass and metal (aluminum, stainless steel, copper and other metal materials).This product has the following characteristics:1. UV fast curing, 2. Low odor and good protective performance 3, low viscosity and easy sizing4. Excellent adhesion to metals (metal materials such as aluminum, stainless steel, copper, etc.) and glass5.After curing, the colloid is strong, with shock absorption and thermal shock resistance.6, aging resistance, radiation resistance, ozone corrosion resistance and other properties7.Excellent waterproof performanceThe main uses of this product: 1.Adhesion of optical lens and metal frame 2.Glass tables and electronic scales are bonded to metal parts 3.The bonding part can have good waterproof performanceProduct image presentation:Technical Parameters:Product nameExtrusion ratio (g/min)AppearanceTackfreetimeApplication fieldsEMSA 20950Paste<20minBonding of electrical componentsAutomobile part bondingLED part bondingGeneral bondingEMSA 209x300Paste<20minEMSA 3571000Paste<10minInstructions:1. Clean the surface of the substrate to be glued. When there is water or detergent remaining on the surface after cleaning, it needs to be dried or wiped.Dry or wait until it is completely dry before applying glue.2. Put (glue) the glue evenly on one of the substrates and place it on the glue for bonding. Press hard to squeeze out the bubbles and glueWater leveling, make sure that the glued parts are covered with glue and fixed in place.3. Use a cloth or paper towel to wipe off the excess glue around the glass plastic. Before this step, try not to let the glue touch the ultraviolet rays.Do not wet the paper liquid with a damp cloth until the glue is fully cured.4. Irradiate with a UV light with a wavelength of 365 nanometers until the adhesive layer is fully cured. The UV lamp should be as close to the glue as possibleWater speeds up curing.5. After curing by ultraviolet irradiation, if there is still overflowing glue around the glass, it can be scraped off carefully with a blade.Precautions:1.The ideal adhesive layer thickness when bonding is 0.01-0.05mm, too thin or too thick will affect the bonding performance.2. Make sure that the adhesive layer absorbs sufficient UV energy to achieve the best curing effect, otherwise it will easily affect the adhesive performance of the adhesive layer.3.Do not move the glass back and forth during UV irradiation, otherwise it will easily cause the adhesive layer to become white and the bonding strength to decrease.4.The remaining glue should not be returned to the original packaging.It should be stored at room temperature away from light and kept out of the reach of children.Storage:Stored in a dark, sealed, ventilated and cool place, the ideal storage temperature is 8-28 ° C.Validity period: 6 months