Product Name: Tengcon Power Supply Isolator Tg6044 with 2*Input/2*Output Model NO.: TG6044 Brand Name: Tengcon Transmission Error: 0.1 Degree, 0.2 Degree T Emperature Drift: Superior to 0.1% Fs/10 Degree Centigrade Current Output Load: 4~20mA Dimension: 16X116X110 (Mm) Weight: about 110g~120g Operating Temperature: -20~60 (Centigrade Degree) Supply Voltage: 20~30VDC Application: Industrial Product Description Tengcon Power Supply Isolator TG6044 with 2*Input/2*OutputSpecifications1.power supply for site instruments2.signal isolated transfer3.signal conversion4.signal allocation in many ways1. Modular design, clamping structure2.Plug-in wire terminal, independent power wire terminal,and availability of plugging with power for convenience of installation, wiring and maintenance.3.Series with CE certificate TG 6000 series is a kind of electrical interface equipment developed by our company which is applicable for non-explosion-proof areas and can be used to connect site instruments and control room. Through reliable power-input-output isolation, it can resolve the site interference of auto-control system and make sure the stability and reliability of the system.Technical parameters1.Power requirement: 20~30VDC;2.Power with general rated value: 24VDC;3.Transmission error: 0.1 degree, 0.2 degree(temperature transmitters);4.T emperature drift: Superior to 0.1% FS/10°C(allowed temperature range);5.Response time: < 1s (10~90%);6.Stabilizing time: about 3~5s;7.Current output load: 4~20mA, ≤5 50Ω;8.V oltage output inner impedance: inner resistance ≤5 00Ω;9.Dielectric strength (among input/output/power supply/instrument housing and wire terminals): ≤5 00Ω;10.Insulation resistance (among power supply/input/output): ≥1 00MΩ;11.Operating temperature range: -20~+60°C;12.Shipping and storage temperature range: -40~+80°C;13.Operating humidity allowed: 5~95%RH (no condensation);14.Operating aTGospheric pressure: 80~106KPa ;15.Electromagnetic compatibility: in accord with 89/336/EEC, IEC/EN 61000;16.Protection grade: IP20 ;17.Housing material: PC+ABS;18.Installation: 35mm standard rail clamping installation;19.Cable in use: 0.5~2.5mm wire;20.Dimension: Width × h eight × l ength = 16× 116× 110 (mm);21.Weight: about 110g~120g;Dimension diagramModel selectionIntroduction. Main T echnical Specification Power supply isolator Supplies isolated direct current power for site transmitter, input 4~20 mA current signal from the transmitter , and outputs DC current or voltage signal to the control system or other instrument units after isolation and anti-interference. The power supply isolator adopts independent DC power supply with power-input-output isolated.Power supplyPower supply: 20~30VDCCurrent consumption (when 24VDC is supplying):< 45mA (single-channel)< 60mA (single-channel, dual-output)< 70mA (single-channel, tri-output)<92mA (two-channel)InputInput signal: 4~20mA direct current signal of transmitterInput impedance: 50Ω (single channel, single channel, dual-output);100Ω (two-channel)Supply voltage for transmitter: ≥ 16V (Power≥ 22VDC)Maximum input current: about 24mAOutputOutput current: 4~20mA; 0~20mA; 0~10mA; other specified currentOutput voltage: 1~5V; 0~5V; 0~10V; other specified voltageAllowed output load: 0~550 Ω (Power ≥2 2VDC at full load of 550Ω)Voltage output impedance: ≤5 00ΩOutput ripple: < 10mVp-pGeneral technical parametersTransmission error: ± 0.1%T emperature drift: ± 0.015% / °CStartup response time: < 1s (10~90%)Power change error: ± 0.1% (voltage scope 20~30VDC)Dielectric strength: 1.5KV, 1 min, 50Hz among input- output- powerInsulation resistance: ≥ 1 00MΩ/500VDC among input- output- powerOperating temperature range: -20~+ 60°CDimension: Width× h eight × l ength = 16× 1 16 × 1 10 (mm)about us: Beijing Tengcontrol Technology Limited CompanyRelyonthehardware,softwareandnetworktechnique,TengconTechnologydevotedtomanufactureindustrialautomationcoreproductsandsystemswithmorethan30%ofemployeearefocusinResearch&Development.Tengconhasdeepandwideexperienceinvarioussignalacquisition,especiallyonelectricsignalacquisition,andalso,familiarswithallmainprotocollikeMODBUS,IEC8705,PROFIBUSDP,CAN,PROFINETetc.,andknowstheropesofIEC61131andtechnologyofProgrammableLogicControllerdevelopmentaswellasIEEE1588andClockSynchronizationTechnologyinEthernet,wearealsorobustonantiinterferenceandlightningprotectiontechnologytoensurethereliabilityofeveryproductdeliveredtocustomer.TengconTechnologyproposedanewadvancedconceptofCompleteDistributedNetworkControlSystem,inthatthecontrolsystemisconstructedviaabsolutelynewtheory.ItcanbeappliedtoconstructtheSCADA(SupervisoryControlandDataAcquisition),PLC(ProgrammableLogicController)andDCS(DistributedControlSystem).TypicalproductweredevelopedbasedontheseisT9serieswhichwerelaunchedinmarketalready.Morethan100thousandsofproducthavebeendeliveredtocustomersandgotwidelyandgoodcustomeracceptanceinpastyears.Alltheseproductsarebeingusedinvariousindustriesin18counties.TheyshowedstrongreliabilityindifferentsystemsandwideenvironmentincludeHighSpeedRail,oilandgasfield,powermonitorandcontrolsystem,kindofautomaticproductionline,BuildingManagementSystem,citylightingcontrolsystem,vehiclemonitoring,agriculturalfarmsetc.wearekeepingtodevelopandprovidefirstclassofproducttoallthecustomerinworldwide.