Product Name: Sinro Cooling Tower Nozzles Model NO.: 4inch Condition: New Certification: ISO, CE, CCC Application Fields: Industrial Noise Level: Low Tower Shape: Square Air Contact Way: Open Air Contact Form: Wet Material: ABS Ventilation Mode: Mechanical Ventilation Cooling Method: Counter Flow Trademark: HACST Transport Package: Wood Box Specification: 4inch Origin: China Product Description SINRO cooling tower nozzlesThe orifice cap is available in 13 diameters ranging from 0.362 through 1.099. These amount of flexibility allows for a wide range of adjustment in the water flow rates and basin water levels.Thecooling towerMarley spray nozzleis available in the followingthree lengths.1. The 2.625Cooling tower nozzleis usedfor wood, steel, and fiberglass cooling towers where basin support structure does not obstruct the release of water.2. The 4.875 cooling tower nozzle is usedfor larger industrial wood and concrete cooling towers and on applications where clogging might be a concern.3. The 6.875 cooling tower nozzle is used on towers where the release of the water has to clear obstructions within the tower structure.In every application the target portion of the nozzle should be located at the correct distance above the top of the cooling tower fill to obtain maximum water distribution over the fill area.Cooling Tower Spray Nozzle Working PrinciplesWorking fluid flowing inside of the cooling tower nozzle coils, which is enwrapped by spray water on the outside.The heat of water is transferred by coil and become the saturated vapor whenthe water flow meet with theair flow.The heat is exhausted out of the cooling tower by the top fan; then the water is collected back into the bottomcooling tower basinand circulates continuously.The spray water is cooled down via PVC radiation fin in the process of circulation, and flows the same direction with the fresh wind. The coil mainly takes sensible heat travel style. The most benefit of this style is can avoid scale formation on the outside of the coil. And this will apply especially to dealing with high temperature fluid (e.g. 60°C) or the fluid need big temperature difference (e.g. 60°C to 35°C).Product SpecificationProduct NameSpray Target NozzlesSize160*220*86mmColorBlackUsedCooling tower accessories