Product Name: Manufacture Aluminum Alloy Flange Ends Y Strainer Fuel Filter with Pressure Gauge Model NO.: KRYG1Y4F-6L Applicable Medium: Gas Certificate: ISO 9001:2008, ISO 14001, OHSAS 18001, API-607 Special Service: Customizable Test Strandard: GB/T 36051-2018 Trademark: KMO Transport Package: Wooden Case Specification: DN25-300 Origin: Zhejiang, Wenzhou HS Code: 8421399090 Product Description Product Introduction The KRYG1Y4F strainer is an indispensable device in the pipe system that conveys gas and other media. It is generally installed at the inlet of gas equipment to removethe impurities in natural gas, liquefied petroleum gas and other media, protecting the valves, flow meters and pressure control devices, etc.KMO's filter has advantages ofadvanced structure, low resistance and convenient sewage discharging. The applicable media includes liquefied gas and natural gas. According to user needs, the filter element is made of stainless steel with good firmness and durability. The meshes of the filter screen can be set according to user needs, generally selectable between 80~700 meshes. The connection ways includeflange and screw. The filter can be optionally equipped with a differential pressure gauge, which can remind the user when it needs to clean.The item has the small volume, fine filtering accuracy, convenient installation and maintenance.Body Material: aluminum alloy(more details please check the follow drawing)Applicable medium: gasDiameter: DN25-150mmNominal Pressure: 0.6MPaDesign temperature:-15ºC~ +60ºCConnection type: flangeFilter meshes: 50 m/in² or customer requirementsDesign Standard:GB/T36051-2018Structure&Length Standard: SH/T3411Flange Standard:GB /JB / HG / DINNotes for use:a. Keep the filter cavity clean before installation to prevent impurities from entering and affecting the use effect.b. When the filter is tested for hydraulic strength, the intake valve should be closed first. After the test is completed,conduct airtightness test on the filter, differential pressure gauge and pressure guiding tube with 0.6MPA air pressure. After the pressure is stabilized, slowly open the two intake valves at the same time to avoid damage to the differential pressure gauge caused by excessive unilateral pressure .c. According to the working conditions on site, it is recommended to periodically drain and clean the filterd KMO. When the pressure difference table shows that the inlet and outlet pressure difference reaches 0.03MPA (or specified by the user), it is recommended to clean the filter element. Cut off the inlet and outlet valves of the filter, and ensure that there is no pressure and medium in the inner cavity, take out the detachable filter element, use a brush to gently remove impurities, wait for clean and reload. If the cleanliness of the filter element still cannot meet the usage conditions after cleaning, it is recommended to replace with a new filter element.e. After each cleaning, you need to re-check to ensure the tightness of the product, and replace the air in the filter with nitrogen.f. Close the intake valve before venting, and slowly open the two intake valves at the same time after the pressure is stabilized to avoid damage to the differential pressure gauge caused by excessive unilateral pressure.More details please referen to the follow pictures:Difference from others:Workshop profile:FAQ:Q: Are you manufacture or trading company?A: We are manufacture and our factory is in in Oubei Town, Yongjia County, Wenzhou City, Zhejiang Province.Q: What is your products' MOQ?A: 10pcs.Q: Can you provide the sample for free?A: Yes, we can provide the sample for free, but you need bear the delivery cost.Q: If products have some quality problem, how would you deal with?A: We will responsible for all the quality problems.Q:If the product can be customized?A: Yes, just let me know if you have any requirements, like applicable medium and size, etc.