Product Name: Hmec-2-110kv High Voltage Phase Nuclear Detector Model NO.: HMEC-2 Weight: about 5kg Display: LCD Type: Strength Testing Machine Frequency Accuracy: +-0.1Hz Measuring Voltage Class: 10kv,35kv,110kv,220kv Operating Humidity: <=95% Rh Storage Humidity: <=95% Rh Trademark: GDHM Transport Package: Wooden Box with Foam Inside Specification: length 71cm * width 26cmm * height 11cm Origin: Hubei, China(Mainland) Product Description I. IntruductionHigh voltage detector 220KV, which is suitable for testing 10KV,35KV,110KV,220KVlive transmission line, phase tests and phase sequence tests for substations, with functions of phase testing, phase sequence testing, electrical inspection. With strong anti-interference ability, in line with (EMC ) standards, adapt to a variety of electromagnetic interference occasions. High voltage phase signal will be taken out by the collector, discharge directly after treatment. Received by instrument and compare the phase, and identify the results. This product is wireless transmission, safe, reliable, fast and accurate, adapt to a variety of phase testing occasions. Its main advantage is without the wire which connect two grids (power source) , distance up to 200M and could trough enclosure or partition plate, improve the safety, without the limitation by terrain and the structure of the equipment , easy to operate, only need one person to operate and one person to supervise.II. Safety1.When testing atfield, keepa safe distance as perhigh-voltage power sector standard operation.2.It has standard configuration of insulating rod 3 m, corresponding to the voltage class≤ 220kV,please use insulatedrod lengths greater than 3 metersif line voltage higher than 220KV.3.When phaseclarificationoperating, holdershould not exceed insulated rod handle.III. Advantage1.Use high capacitive non-maintenance lithium battery to supply power, special for field test.2. Long transmission distance, up to 200M.3. LCD display phase ,waveform, frequency , safe and reliable.4. Telescopic insulation bar, easy to use.5. Portable receiver with non-skid treatment.6. uses advanced technique, small in volume, light in weightIV. Technical Parameter1.Phaseerror: ≤5 °.2.Frequency accuracy: ± 0.1Hz.3.Measuringvoltage class: 10KV,35KV,110KV,220KV4.Transmission distance between the transmitter and Receiver: > 100 m;5.A class judgmentresult(in-phase, out-phase): phase difference ≥30°: out of phase; phase difference <30°: in-phase.6.Live voice prompt, Boy"in-phase" and Girl "out of phase".7.LCD simultaneouslydisplays 2lines'phase, frequency, waveform and vector diagram.8.Receiver (host)shows battery level, and automatic shutdownif nooperatingin a half hour.9.Transmitter and receiver are built-in rechargeable lithium battery.10.High voltageelectrical detectionand approval phase sequencedual purposes.11.Leakage currentwhen HV measurement:<10µA.12.Transmitter operating power <0.1W, Receiving operating power <0.3W.13.Receiver lithium battery capacity:2200mAH, transmitter battery capacity:350mAH.14.Operating environment: -35ºC ~+ 45 ºC,humidity ≤95% RH.15.Storage environment: -40ºC~ + 55 ºC,humidity ≤95% RH.16.Weight: about 5KG.17.Package dimension: length 71cm * width 26cmm * height 11cm.V. Additional remarkVlotage ClassOperating remarkRemark220KVConnected Transmitters to Insulation rod(3m), hooking HV line,start the receiverNormal110KVConnected Transmitters to Insulation rod(3m), hooking HV line,start the receiverNormal35KVConnected Transmitters to Insulation rod(3m), hooking HV line,start the receiverNormal10KV(Naked)Connected Transmitters to Insulation rod(3m), hooking HV line,start the receiverNormal10KV(with insulation cover)Connected Transmitters to Insulation rod(3m), hooking HV line,start the receiverTurn on the transmitter, off the transmitter after finishing380V/220VConnected commercial power special line to Transmitters,start the receiverUsing commercial power special lineSwitch induction(~5V)Connected switch inductive cable to the transmitters and start the receiverUsing switch inductive power cableVI. AccessariesSr no.DescriptionQuantity 1Aluminium alloy box1unit 2Receiver (Host)1unit 3Transmitter2units(X,Y, each one) 4Extension-typeinsulation road(3m)2units 5Charger2units 6Pointed end2units 7Commercial power special cable2units 8Switch inductive power cable2unis (Optional) 9Operating manaul1unit 10Calibration1unit