Product Name: High Quality LED 200W Soft Fresnel Profile Light DJ Equipment Model NO.: YG-D002B Certification: CE, RoHS, CCC, GS, CSA, Energy Star, FCC, SAA, C-tick, NOM, PSE, GOST, EMC, LVD, KEMA, IMQ LED Chips: CREE Shell Material: Aluminium Alloy Diffuser: Polycarbonate Input Voltage: 220V Electric Current Type: AC Life: 50000h IP Rating: IP20 Waterproof: Not Waterproof Power: 200W Emitting Color: White Type: PAR64 Voltage: AC 90-240V, 50-60Hz Lighting Source: 200W High Brightness COB Control Mode: DMX512, Auto, Sound Activated AMD Master-Slave Control Channel: 8CH Trademark: GZ Yuelight Transport Package: Carton or Flycase Specification: CE Rohs, FCC ISO9001: 2008 Origin: Guangzhou HS Code: 9405409000 Product Description LED 200W Profile Wall Washer LightVoltage: AC110V-240V 50Hz-60HzLighting Source: Warm White 200W LED Power: 250WLighting Color: Warm WhiteControl channel: 2 channels Control Signal: DMX512Lens Angel: 19 degreesLighting SourceLED 200WPower250WFeatureUse 200W LED high brightness COB LED. Even brightness and no flash. Adapted high strength aluminum alloy for housing.Great cooling system, reduce light failure longer life time. Suitable for stage, theater, disco, church, hotel etc Installation:When installation, keep the device far away the heat sensitive objects and explosives sensitive objects, leave at least 50CM of free space around the device.When the device put on horizontal place, the device must be placed directly on the place, and device must be secured with a mounting holder.3.When rigging the devices on the truss and the head face to the floor. Screw one clamp each via a M12 screw and nut onto the mounting holder. Insert the quick-lock fasteners of the first mounting holder into the respective holes on the bottom of the device. Tighten the quick-lock fasteners fully clockwise. Install the second mounting holder. And the safety rope must be used at same timePlease use qualified safety-rope, which can hold at lease 10 times the weight of the fixture. You must only use safety-ropes with quick links with screw cap. Pull the safety-rope through the hole on the bottom of the base and over the trussing system etc. Insert the end in the quick link and tighten the fixation screw. A safety rope which already hold the strain of a crash or which is defective must not be used again.