Huaxiao Capacity about 2507 Hot rolled stainless steel coil ,2507 HRC

Thickness: 1.2mm - 10mm

Width: 600mm - 2000mm, the narrowed products pls check in strip products

Max coil weight: 40MT

Coil ID: 508mm,610mm

Finish: NO.1, 1D, 2D, #1, hot rolled finished, black, Anneal and pickling, mill finish

2507 Same grade from different mill standard

S32750  00Cr25Ni7Mo4N  022Cr25Ni7Mo4N  1.4410

2507 Chemical component ASTM A240

C?≤0.03 ?Si ?≤0.8 ?Mn?≤2.0 ?Cr?24.0?26.0 ?Ni?8.0?8.0??S ?≤0.02 ?P ?≤0.035 Mo: 3.0?5.0,  Cu: < 0.5 , N: ≤0.24?0.32

2507 mechanical property ASTM A240

Tensile strength :  > 795 Mpa

Yield Strength :  >550 Mpa

Elongation (%):  > 15%

Hardness: < HV310

Simple description about  duplex/super duplex stainless steel  2205/ 2507

         Duplex Stainless Steel (DSS) refers to approximately 50% of ferrite and austenite, and generally contains less than 30% of stainless steel. In the case of lower C content, the Cr content is 18% to 28%, and the Ni content is 3% to 10%. Some steels also contain alloying elements such as Mo, Cu, Nb, Ti, and N.

         This type of steel combines the characteristics of austenitic and ferritic stainless steels. Compared with ferrite, it has higher plasticity and toughness, no brittleness at room temperature, significantly improved resistance to intergranular corrosion and welding performance, and at the same time retains iron. The 475°C brittleness and high thermal conductivity of the ferritic stainless steel make it superplastic. Compared with austenitic stainless steels, they have high strength and resistance to intergranular corrosion and chloride stress corrosion resistance. Duplex stainless steel has excellent pitting corrosion resistance and is also a nickel-saving stainless steel.

Duplex stainless steel classification

         The first type is a low-alloy type, which stands for UNS S32304 (23Cr-4Ni-0.1N). The steel does not contain molybdenum and its PREN value is 24-25. It can be used instead of AISI304 or 316 in terms of stress corrosion resistance.

         The second type of alloy is a type of alloy, represented by UNS S31803 (22Cr-5Ni-3Mo-0.15N) with a PREN value of 32-33, and its corrosion resistance is between AISI 316L and 6% Mo+N austenitic stainless steel. between.

The third category is a high alloy type, generally containing 25% Cr, also containing molybdenum and nitrogen, and some also contain copper and tungsten, standard grade UNSS32550 (25Cr-6Ni-3Mo-2Cu-0.2N), PREN value is 38-39 The corrosion resistance of this type of steel is higher than that of 22% Cr duplex stainless steel.

The fourth type is a super duplex stainless steel type, containing high molybdenum and nitrogen, standard grade UNS S32750 (25Cr-7Ni-3.7Mo-0.3N), some also containing tungsten and copper, PREN value greater than 40, can be applied to harsh Medium conditions, with good corrosion and mechanical properties, comparable to super austenitic stainless steels.