Product Name: Urea Formaldehyde Moulding Compound Model NO.: DIN 7708 Type 131.5 / ISO - UL94 Color: All Colors Plastic Forming Method: Injection and Compression Plastic Properties After Heated: Thermosetting Plastic Usage: General Plastics, Engineering Plastics, Specialty Plastics Material: Duroplast Un-Notched Impact Strength: 7.52 Kj/M2 Notched Impact Strength: 1.68 Kj/M2 Hot Distortion Temperature(Hdt): 123 Degree C Density: 1.48 g/cm3 Shrinkage: 0.74% Post Shringage(80c+/-2c, 48h): 0.54% Dielectric Strength: 13.7 Mv/M Insulation Resistance After Immersion: 2.7*10**12 Ohm Proof Tracking Index: Pti 600-0.52 Glow Wire 960 C, 180 Sec: Bh2-10 Trademark: JOSEN Transport Package: 25kgs/Bag, or 750kgs/Bag Specification: RoHS, Reach, SGS, ISO Origin: China, Jiangsu, Liyang HS Code: 39091000 Product Description GENERAL CHARACTERISTICS.JOSEN Amino Moulding Powders are based on colourless thermosetting resins which are condensation products of either urea or melamine with formaldehyde. These resins are combined with high purity alpha cellulose filler, pigments, catalyst and other additives to give the range of materials described in our Technical Brochure.JOSEN materials conform to internationally recognised standards. ( DIN 7708 Type 131.5 / ISO 2112/BS1322 - UFA10 / UL94 )STABILITYA storage of at least 6 months can be expected when stored in cool and dry conditions between 5'C and 20'C. A prolonged storage at higher temperatures will reduce the storage life of the material.