Product Name: Solas Pilot's Ship Rope Spare Parts for Pilot Rope Wooden Ladder Rubber Step Ec Certificate Model NO.: PLB Material: Willow Rope Ladder Lenth: According to Requirements Model: Pilot and Embarkation Ladder Application: Embarking and Disembarking Trademark: HANTIAN Transport Package: Plastic Bag Specification: wooden ladder Origin: China HS Code: 4421999090 Product Description SOLAS pilot's ship rope spare parts for pilot rope wooden ladder rubber step EC certificatePilot ladder and embarkation wooden ladder are one type of rope ladder, usually made by hard wood and used for embarking and disembarking pilots and crew. It is an important tool for marine safety. With spreaders step (Preventer Step) and magnet, pilot ladder and embarkation ladder could work safety under kinds of sea conditionsWooden ladder Standard: Requirements of the ZC Regulations for the statutory surveys of ships and offshore installationsProduct Inspection Standard: Requirements of the ZC Regulations for the statutory surveys of ships and offshore installations and International Marine Anti-collision Regulation(1972),1996 Amendments to the SOLAS1974, and CB/T3142-94,CB/T428-93Namemm Board Size (mm)OrificeMaterialShort BoardLong BoardPilots Rope Ladder525×115×28flat board1800×115×28Φ25mmwillow525×115×30∼38525×115×30∼60slotting boardRope Ladder525×115×28flat board1800×115×28525×115×30∼38525×115×30∼60slotting boardProduct Description:1. wooden ladder Step material: hard wood2. The Max qty of step: 30steps3. Equipped in the embarking place of the life raft and boat, for pilots to board and leave the vessels.4. In accordance with the 2000 Amendments to SOLAS 1974 and LSA.5. The lowest 4steps are rubber plates with steel lining;6. The count-down fifth plate is spreader step, and there are 8short boards between two neighboring spreader steps.7. The distance between two neighboring steps is 330+/-20mmPilot Ladder PartsMade up of Rubber step (the last four steps), Wood step, Spreader (Preventer Step), Step fixing piece, rope.Rope:Ropes should be mold-resistant manila or heat-treated polyester rope with polypropylene core and should not be covered. Ropes shall be of adiameter which is no less than 57mm in circumference, and have abraking strength more than 24KN.Steps:The distance of inner edge of side ropes should be more than 400mm, the width of step is no less than 115mm, and thickness no less than 25mm. The steps should be non-slip, hard wood steps without knot and equally spaced at 330±20mm.Rubber Step:The bottom 4steps may be made fresilient synthetic raw material or rubber if it is of sufficient strength and stiffness. Rubber steps should be of the same required dimensions as the wooden steps.Spreader:Spreader shall have the same specifications as normal steps, but length of spreader shall not be less than 1.8 meters.Step Fixing Piece:Must be wood or plasticFastening Hardware:Fastening hardware for rope and steps must be corrosion resistant, or made of similar material treated corrosion resistance.Contact:Mobile: +86 186 6855 2730