Product Name: RS-150 Single Output Switching Power Supply Model NO.: RS-150 Brand: Elecal Certification: CE Input Voltage: 88 ~ 132VAC / 176 ~ 264VDC Output Power: 99W~158W Warranty: 2 Years Output Type: Single Output Frequency Range: 47-63Hz Trademark: ELECAL Transport Package: Carton Specification: 199*98*38mm (L*W*H) Origin: Wenzhou Product Description MODELRS-150-3.3RS-150-5RS-150-12RS-150-15RS-150-24RS-150-48OUTPUTDC VOLTAGE3.3V5V12V15V24V48VRATED CURRENT30A26A12.5A10A6.5A3.3ACURRENT RANGE0 ~ 30A0 ~ 26A0 ~ 12.5A0 ~ 10A0 ~ 6.5A0 ~ 3.3ARATED POWER99W130W150W150W156W158.4WRIPPLE & NOISE (max.) Note.280mVp-p80mVp-p120mVp-p120mVp-p120mVp-p200mVp-pVOLTAGEADJ. RANGE3.2V ~ 3.5V4.75 ~ 5.5V11.4 ~ 13.2V14.25 ~ 16.5V22.8 ~ 26.4V45.6 ~ 52.8VVOLTAGE TOLERANCE Note.3±3.0%± 2.0%±1.0%±1.0%±1.0%±1.0%LINE REGULATION Note.4±0.5%± 0.5%±0.5%±0.5%±0.5%± 0.5%LOAD REGULATION Note.5± 2.0%± 1.0%±0.5%± 0.5%± 0.5%± 0.5%SETUP, RISE TIME800ms, 20ms/230VAC 1200ms, 30ms/115VAC at full loadHOLD UPTIME (Typ.)28ms/230VAC 20ms/115VAC at full loadINPUTVOLTAGE RANGE88 ~ 132VAC / 176 ~ 264VAC selected by switch 248 ~ 373VDC(Withstand 300VAC surge for 5sec. Without damage)FREQUENCY RANGE47 ~63HzEFFICIENCY(Typ.)74%78%83%84%86%87%AC CURRENT (Typ.)3A/115VAC 2A/230VACINRUSH CURRENT (Typ.)COLD START40A/230VACLEAKAGE CURRENT<2mA/240VACPROTECTIonOVERLOAD Note.8110 ~ 150% rated output powerProtection type : Hiccup mode, recovers automatically after fault condition is removedOVER VOLTAGE3.8 ~ 4.45V5.75 ~ 6.75V13.8 ~ 16.2V17.25 ~ 20.25V27.6 ~ 32.4V55.2 ~ 64.8VProtection type : Hiccup mode, recovers automatically after fault condition is removedENVIRonMENTWORKING TEMP.-25 ~ +70 V (Refer to "Derating Curve")WORKING HUMIDITY20 ~ 90% RH non-condensingSTORAGE TEMP., HUMIDITY-40 ~ +85 V, 10 ~ 95% RHTEMP. COEFFICIENT±.03%/ V(0 ~ 50 VVIBRATION10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X,Y, Z axesSAFETY &EMC(Note 6)SAFETY STANDARDSUL60950-1,TUV EN60950-1 approvedWITHSTAND VOLTAGEI/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVACISOLATION RESISTANCEI/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC/ 25 V/ 70% RHEMC EMISSIonCompliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3EMC IMMUNITYCompliance to EN61000-4-2,3,4,5,6,8,11,EN61000-6-2 (EN50082-2), heavy industry level, criteriaAOTHERSMTBF244KHrs min. MIL-HDBK-217F (25 V)DIMENSION199*98*38mm (L*W*H)PACKING0.7Kg; 20pcs/15Kg/0.8CUFTNOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25C of ambient temperature.2. Ripple & noise are measured at 20MHz of bandwidth by using a 12M twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.3. Tolerance : includes set up tolerance, line regulation and load regulation.4. Line regulation is measured from low line to high line at rated load.5. Load regulation is measured from 0% to 100% rated load.6. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time.7. Extra consideration should be taken when selecting output wiring for 3.3V and 5V models. This is to prevent the protection modes for overioad and short circuit from becoming constant power