Product Name: Pressure metallographic Sample Preparation Cold Mounting Press Machine Model NO.: MP-3000P Mounting Type: Cold Mounting Mounting Method: Mounting by Pressure Working Pressure: 0.2MPa Inside Work Volume: 5L Trademark: EBP Transport Package: Plywood Box Specification: 300x400x300mm Origin: Zhejiang, China HS Code: 8474809090 Product Description Pressure metallographic Sample Preparation Cold Mounting Press MachineProduct introduction:Cold mosaic pressure cooker is a special metallographic inlay device designed to meet the special requirement of quick curing of inlay resin. By using this equipment, the bubbles and pores in the embedded samples can be greatly reduced without changing the physical and chemical properties of the resin, thus providing the best results for subsequent sample polishing and micro-structure analysis.Features:1.Unique design, safer products.1)When there is pressure in the pot, the lid is automatically locked;2)During work mode, the lid cannot be opened;3)When the pressure exceeds 10% of the working pressure, the pressure relief valve on the top of the pot lid will relieve the pressure automatically.2.The pressure vessel is made of stainless steel with large inner volume and can handle more than 20 samples with diameter of 30mm at the same time.3.Simple operation, control switch up ventilation and pressure, pressure relief.Technical specification:ModelMP-3000PMounting typeCold mountingMounting methodMounting by pressureWorking pressure0.2MPaSafe pressure0.22MPaMax.air source pressure0.6mbarInside workvolume5LDimension300×400×300mmWeight8KgStandard accessories:ItemQuantityItemQuantityPressure cooker1Timer1High-pressure tracheal1Manual, certificate1Optional Purchase: Air pump