Product Name: Popular Knee Rehabilitation Equipment, Knee Brace, Health Care Products for Knee Model NO.: MED-R-XYGS-2 Type: Quadriceps Femoris Training Board Health Care Product: Size(Cm):113*112*116 Knee Rehabilitation Equipment: Weight:57kg Health Care Products for Knee: Seat Cushion Height mm:670 Knee Brace: Armrest Width mm:590 Quadriceps Femoris Training Chair: Adjusting T Range of Lifting Support mm:0-150 Physical Therapy Equipment: Adjusting Range of Shank Cushion mm:0-470 Rehabilitation Equipment: Adjusting Range of Power-Assisted Handle:0-280 Physiotherapy: Seat Rated Load Kg:135 Therapy: Seat Cushion Rated Load:55 Trademark: Med Equipment Transport Package: 113*112*116cm W: 57kg Specification: CE, ISO Origin: Guangdong, China (Mainland) Product Description Quadriceps Femoris Training ChairMED-R-XYGS-2User's Guide of theknee rehabilitation equipment1. Summary1.1 Main Purpose and Applicable RangeThis product is applicable for patients with restricted knee joint motion to take the quadriceps femoris anti-resistance active exercise and it can also implement knee joint traction.1.2 Executive Product Standard: enterprise standard2. Basic ParametersTable 1 Basic ParametersNameType R-XYGS-2Seat Cushion Height mm670Armrest Width mm590Adjusting t Range of Lifting Support mm0-150Adjusting Range of Shank Cushion mm0-470Adjusting Range of Power-assisted Handle mm0-280Swing Angle of Shank SupportNot less than 120°Seat Rated Load kg135Seat Cushion Rated Load (horizontally placed) kg55Weight of Balance Weight Block kg1.8Quantity of Balance Weight Block4 PiecesOverall Dimensions(length × width × height),cm113×112×1163. Service Performance 3.1 The lifting support, shank cushion, shank support and power-assisted handle can be adjusted in prescribed range. 3.2 The swing angle of shank support can be adjusted by devices as balance weight support and index plate, etc. The angle of the adjoining holes on index plate is 20°. 3.3 The training mode can be sitting or horizontal by adjusting the back cushion.4. Application Method 4.1 According to the patient's body feature and training demand, the training chair components as the lifting support, shank cushion, shank support and seat cushion can be respectively adjusted to proper position. 4.2 According the patient's situation and training demand, sitting mode training and horizontal mode training can be adopted. To adjust the sitting mode to horizontal mode: Loosen the square bolt of the back cushion; move the back cushion backwards; turn it to be horizontal; insert it into the chair frame and then screw down the bolt. The same method is adopted for the reverse. 4.3 Pin structure is adopted for the shank cushion. Draw the pin out, the cushion can be rotated outside by 90°. 4.4 According to the patient's body feature, adjust the lifting support to an appropriate height. The bolt locking structure is adopted for lifting support. Loosen the bolt, move the lifting pipe up and down and then fix it. 4.5 The method of adjusting shank cushion height is the same as Item 4.4. 4.6 The patient sits on the seat cushion with feet off the ground; turn the shank cushion to original position and then fixed with pins. Press the front or back of the shank close to the cushion and tighten the fastening belt appropriately. To implement the training, adjust the balance weight support angle and balance weight block quantity according to the training demand. 4.7 Adjustment of the shank support swing angle: Draw the spring pin out to separate the pin and the index plate; rotate the balance weight support to required position; loosen the spring pin and insert the pin into the holes on index plate. The angle can be adjusted for vastus muscle training and knee joint traction. 4.8 The assembling and disassembling method of the balance weight block: Push both ends of the spring hoop to make it loose and make it slide out from the rod. After assemble or disassemble the balance weight block, use the same method to fix the spring hoop. 4.9 During the training, when the quadriceps is too exhausted to swing the presser bar, the physical therapist or nursing staff can add appropriate strength on the power-assisted handle to help. The power-assisted handle can be adjusted according to demand of the physical therapist or nursing staff. 4.10 After training, disassemble the balance weight block and put it on spring pin 12.5. Precautions5.1 Before using the sand bag, please read the "User's Guide"; be familiar with the product function, requirements and operation method; test the product with no-load operation to verify that the product is in normal condition for using. 5.2 The training should be implemented under guidance of the physical therapist and with help of the nursing staff. 5.3 The balance weight support should be adjusted without balance weight block loaded. The original angle of balance weight support is vertically directing to the ground, the adjusting angle to both sides should not be more than 120°. (That means every 6 adjoining holes on the index plate.) 5.4 The training should comply with the principle of "Step by Step". Gradually prolong the training time, enhance the swing angle and balance weight.5.5 Before training, all the binding bolts should be adjusted and screwed down tightly; the spring pin of index plate should be wholly plugged into the hole, the spring hoop should be fixed clinging to the balance weight block. 5.6 It is not allowed to use the balance weight block as a knocking tool.Welcome to contact us for theknee rehabilitation equipment.