Product Name: Medical Supply Red Infrared Lamp LED Light Emitting Diode Trademark: CGX Transport Package: Carton Specification: 10g Origin: Shenzhen, China HS Code: 4403969423 Product Description Features:(1)Lead frame molded packages(2)Two and three or four leads designs(3)Bi-wavelengths or triple wavelengths LEs(4)Matching detector responseApplications:(1)SPO2(2)Medical instrumentation(3)Blood anaiysis(4)Radiometric instrumentsTypical applications: blood oxygen sensor, finger clip/ear clip blood oxygen probe, soft silica gel blood oxygen probe, medical devices.Dimension:Notes: 1.All dimensions are in millimetersFeatures:(1)4.1*5.6.*1.8 mm ELLIPSE LAMP(2)LOWCURRENT REQUIREMENT(3)LOWPOWER ConSUMPTION(4)VERSATILE MOUNTING ON P.C. BOARD PANE(5)LONG LIFE-SOLID STATE RELIABILITYPackage Dimensions:Notes:(1)All dimensions are in millimeters.(2)Tolerance is ±0.25 unless otherwise noted.(3)Specifications are subject to change without notice.Storage and Soldering Condition:(1)Do not open moisture proofs bag before the products are ready to use.(2)Before opening the package, the LEDs should be kept at 30ºC or less and 90% RH or les.(3)The LEDs should be used within a year.(4)After opening the package, the LEDs should be kept at 30ºC or less and 70% RH or less.(5)The LEDs should be used within 168 hours (7 days) after opening the package.(6)When soldering, do not put stress on the LEDs during heating.(7)If the moisture adsorbent material (silica gel) has fabled away or the LEDs haveexceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment: 60±5ºC for 24 hours.(8)After soldering, do not warp the circuit board.(9)Each terminal is to go to the tip of soldering iron temperature less than 260ºC for 5seconds within once in less than the soldering iron capacity 25W. Leave tow seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder.