Product Name: Est Series Air Cooler Evaporator for Cold Storage Room Model NO.: EST-27.3XS Material: Steel, Cooper and Aluminum Style: Air Cooled Finned Tube Principle: Dividing Wall Type Application: Cooler, Vaporizer, Cold Room, Cold Storage Certification: CE, ISO Defrosting Heater: Stainless Steel OEM/ODM: Available Color: White Fin Spacing: 4.5mm, 6mm and 9mm Coil Fin: Aluminum or Expoxy Coated Power Supply: 50Hz, 60Hz Standard Casing: Galvanised Sheet and Powder Coated Fan: Low Noise, Maintenance Free Tube Material: 5/8'' Copper Ss Casing: Optional Defrosting Mode 1: Electrical-Heating Defrosting Defrosting Mode 2: Water Defrosting Optional Use: Cold Room, Cold Storage, Freezer Room Trademark: ESACIR Transport Package: Standard Export Package Specification: CE Origin: Guangdong, China HS Code: 8418692090 Product Description 1.Cold Room Cold storage Evaporator introduction and Technical dataCeiling mounted typical air cooler(evaporator) which been widely used for different refrigerated room, cold room and cold storage.It is a indoor cooling equipment which need connect with outdoor freon condensing unit.1) ESTJS: 0ºC keeping-fresh room;2) ESTKS: -18ºC refrigerating room;3) ESTXS:-25ºC fast refrigerating room;ModelCapacity KWAir FlowAir throw Fan Dia.Fan QtyFan PowerDefrosting Power(KW)DT=7K,t0=-7ºCR22R404Am3/hmcmpcsWcoilwater collectorEST-2.3JS2.22.3150093119010.5EST-3.7JS3.53.715009311901.50.5EST-4.9JS4.74.9300093121802.70.9EST-6.3JS66.3300093121803.60.9EST-9.5JS99.54500103522803.61.2EST-13.1JS12.513.17000124023904.81.2EST-15.2JS14.515.270001240239061.2EST-17.9JS1717.970001240239061.2EST-26.3JS2526.312000155021000104EST-30.5JS2930.51350014453840104EST-38.3JS36.538.318000155031500104EST-44.1JS4244.118000155031500124EST-51.5JS4951.518000155031500124EST-62JS59622400015504200015.65.2EST-73.5JS7073.53000018554300015.65.2EST-88.2JS8488.23000018554300023.45.2EST-108.2JS103108.242000186043400265.2EST-117.6JS112117.64600018634352031.25.2EST-128.1JS122128.14600020634352033.85.2ModelCapacity KWAir FlowAir throw Fan Dia.Fan QtyFan PowerDefrosting Power(KW)DT=7K,t0=-25ºCR22R404Am3/hmcmpcsWcoilwater collectorEST-1.5KS1.41.5150093119010.5EST-2.4KS2.32.415009311901.50.5EST-3.2KS33.2300093121802.70.9EST-4.7KS4.54.7300093121803.60.9EST-6.3KS66.34500103522803.61.2EST-7.9KS7.57.97000124023904.81.2EST-9.5KS99.570001240239061.2EST-11.6KS1111.670001240239061.2EST-16.3KS15.516.312000155021000104EST-20KS19201350014453840104EST-25.2KS2425.218000155031500104EST-30.5KS2930.518000155031500124EST-33.6KS3233.618000155031500124EST-39.9KS3839.92400015504200015.65.2EST-49.4KS4749.43000018554300015.65.2EST-60.9KS5860.93000018554300023.45.2EST-75.6KS7275.642000186043400265.2EST-83KS79834600018634352031.25.2EST-92.4KS8892.44600020634352033.85.2ModelCapacity KWAir FlowAir throw Fan Dia.Fan QtyFan PowerDefrosting Power(KW)DT=7K,t0=-32ºCR22R404Am3/hmcmpcsWcoilwater collectorEST-1.8XS1.71.815009311901.50.5EST-2.3XS2.22.3300093121802.70.9EST-2.8XS2.72.8300093121803.60.9EST-4.4XS4.24.44500103522803.61.2EST-5.9XS5.65.97000124023904.81.2EST-7.1XS6.87.170001240239061.2EST-8.2XS7.88.270001240239061.2EST-12.1XS11.512.112000155021000104EST-14.7XS1414.71350014453840104EST-17.9XS1717.918000155031500104EST-21XS202118000155031500124EST-24.2XS2324.218000155031500124EST-27.3XS2627.32400015504200015.65.2EST-32.6XS3132.63000018554300015.65.2EST-42XS40423000018554300023.45.2EST-51.5XS4951.542000186043400265.2EST-56XS53.6564600018634352031.25.2EST-61XS58614600020634352033.85.22.Cold Room Cold storage EvaporatorFeatures1) Coli Blocka) Φ16mm Copper tube or other size copper pipeb) High efficiency sine wave fin.c) Fin material: Aluminumd) Fin Pitch: 4.5mm, 6mm,9mm.e) Other fin pitch can be customized by user.2) Optimized Designa) Structures and covers of Unit Cooler are designed by our 3D software .b) Our advanced coil software can simulate your running heating conditions. c) We can provide CAD drawings and reliable data of your customized products.3) Optimized Structure& Casinga) Using maintenance door(optional), checking and maintenance will be easier.b) Support foots are considered which can provide convenience of installing and carring.c) Normal casing material is galvanized steel , power coated white.d) Other option: Aluminum or stainless steel4) Guarantee of Safe Runninga) Stainless steel Pipe running pressure to 5.0Mpa, Blasting pressure to 40Mpa.b) Nitrogen pressure 5.0Mpa which keeping 24 hours forleaking test.5) Fan Systema) Extended air throw streamer, air throw can reach to 70mb) Motor protection class IP54, Insulation grade F.c) Duct axial fan blades are made of casting aluminumd) Motor application temperature: -45ºC~50ºC.e) Lower noise fan is possible for special application conditions.f) Motor power will be changed with the change of air temperature and resistance.6) Rapid Defrosting Systema) Electrical defrosting- stainless steel heating pipe,installed in fan, coil and water panb) Water defrosting- water tray spraying is optionalc) Hot gas defrosting- hot gas pipe set in tray, energy saving and high efficient, help oil return to compressord) Combine different defrosting ways together3. Eurostars cold room condensing unit and EvaporatorA) Wall/Roof mounted monoblock condensing unit/ refrigeration unitB) Emerson Copeland compressor condensing unit /refrigeration unit(box type structure)C) Bitzer piston compressor condensing unit/ refrigeration unit(box type structure)D) Bitzer piston compressor condensing unit/ refrigeration unit(open type structure)E) Bitzer 2-stage compressor condensing unit /refrigeration unitF) Bitzer Semi-hermetic piston compressor racks condensing unit /refrigeration unitG) Bitzer Semi-hermetic screw compressor racks condensing unit /refrigeration unitH) Hanbell Semi-hermetic screw compressor racks condensing unit /refrigeration unitI) Cold room cold storage indoor evaporator4.about USEUROSTARSAdvantages:1)TheProofofQuality:Nowwehavecustomersindifferentcountriesandplaces,suchas Mexico,Australia NewZealand,Singapore,Argentina,Middle-East,Africa…2)TheGuaranteeofQuality:Reasonabledesign,Professionaltechnicians,Stableproductionworkers,Full-scaleEquipments,StrictQA&QCsystem…3)Custom-madeDesign:Wesupplyourdesigndrawingaccordingtocustomerpracticalsituation4)TechniqueSupport:Walkincoldroom:wesupplyourdiagrammaticdrawing,feeleasierforinstallation;Coldstoragewarehouse:Wehaveprofessionalengineerswhocangoaboardtosupplytechnologysupportanddirection,until turnkeyforourcustomers.5)InternationalTradeOperation:Wehaveconcentratedoninternationaltradeofcoldstorageroomlineformanyyears,accumulatedvariousexperiencefromdifferentcustomersofdifferentcountries.Sowecanupdateouroperationintimeaccordingtoourcustomersandnewrules.Itishelpfultoclearcustomandsavecostandtimeforourcustomers.5.FAQQ:What information do you need to provide in order to get a quotation?A:Generally, for condensing unit we need to know following items:-Cooling Capacity,-Required cold room temperature or evaporatingtemperature-Water cooling system or air cooling system.-Compressor brand-Electrical power supply, such as 380V-3Phase-50HZ or 440V-3Phase-60HZ-Refrigerant, such as R22 or R404a-It is better there are local ambient temperature datasIf can not give full answers for above items, we can via another way, such as cold room dimension, application, etc6. Customers Visit7. Product package and deliverA:For cold room machine:Standard package fwith plywood, the unit can be well protected, it is with pallet on the bottom for easy transportation., the unit can be well protected ,suitable for container shipment.B:For cold room panel:Plastic film for panel, Each panel is well wrapped with plastic film respectively, the corner is protected with brown paper.8. Installation instructions and project photo1. The cooler can be fixed on the ceiling with 4, 8, or 10 long bolts. 2. The space between the unit and wall must be ≥400mm (see the diagram). It is necessary for air circulation and maintenance.3. The unit must be level after being fixed.4. A slope on the drainage pipe from the cooler to the outside is needed for the condensed Water goes to outside smoothly. A U shape is needed at the outside on the drainage pipe to keep the hot air from going inside. (See the diagram) 5. The drainage pipe inside the room need be heat insulated. The heating line is needed to prevent the condensed water from freezing in case the cold room temperature is below 0ºC.6. The temperature sensor of the solenoid valve should be fixed on the level parts of suction pipe, keep touch well with the pipe surface. The suction pipe should be heat insulated to prevent the sensor from interfered by the room temperature. 7. The space outside the air outlet of the cooler must not be no obstacles, to prevent the air blowing be interfered.