Product Name: Conductive Polymer Aluminum Solid Capacitor Electrolytic Model NO.: TMCE31 Electrolyte: Electrolytic Manufacturing Material: Electrolytic Structure: Fixed Capacitor Capacitance: 270UF Packaging Type: Through Hole Application: General Purpose Type: Aluminum Electrolytic Capacitor Rated Voltage: 16VDC Trademark: TOPMAY Transport Package: Bulk Specification: CE RoHS Reach Report Origin: China HS Code: 8532229000 Product Description Conductive Polymer Aluminum Solid Capacitors (RP Series)Scope: This specification covers polarized aluminum electrolytic capacitors with solid electrolyte for use in electronic equipment.Reference Standard: JISC 5101-4-2 1998 Aluminum electrolytic capacitors with solid electrolyteOperating Temperature Range-55° C-~+105° CRated Voltage16VDCSurge Voltage18.4VDCDissipation Factor (tan δ )0.12Measurement Frequency120Hz. Temperature: 20° CMeasurement Voltage (V)No more than 0.5Vrms+2.1~2.5VDCCapacitance Tolerance± 20% (120Hz, 20° C)Capacitance270uFESR: 12mΩMeasurement Frequency: 100~300kHz± 10%Measurement Voltage (V): No more than 0.5Vrms+2.1~2.5VDCTemperature: 20° C± 10° CLeakage Current: The rated voltage shall be applied between terminals of capacitor such that the terminal voltage will reach the rated voltage with in two minute and the leakage current shall be measured at following time after the voltage has reached the rated voltage across a 1000± 10Ω Series protection resistor. Then the current value shall not be exceed value calculated from following formula.Rated 16V/270uF LC(2 Minute) 864uATemperature Characteristics: Measurement Impedance at +20± 2° C, 100kHz± 20%Measurement Impedance at -25± 2° C, 100kHz± 20%Measurement Impedance at -55± 2° C, 100kHz± 20%Impedance ratio of the -25° C and -55° C values to the +20° C value shall be not exceed the following values.Z(-25° C)/Z(+20° C) 1.15Z(-55° C)/Z(+20° C) 1.25Endurance( Load Life Test)Capacitors shall be applied the rated voltage continuously through 1000Ω Series protective resistor at 105± 2° C for 2000hours. After the test and returned in standard condition for 1~2 hours, and the capacitor shall meet the following requirements.