Product Name: CO2 Laser 80W Power Supply Hy-T80 for CO2 Laser Engraving Cutting Machine Model NO.: HY-T80 Type: Laser Power Supply Standard Component: Standard Component Customized: Non-Customized Power: 80W Input Voltage: 220V or 110V Output Voltage: 40kw Max Output Voltage: DC 35kv Max Output Current: DC 24mA Mtbf: >=10000hours Max Input Power: 5500W Max Input Current: 5A AC Frequency: 47 - 440Hz Trademark: Dragondiamond Transport Package: Carton Packing Origin: Guang Dong(China) Product Description 60w Universal Co2 Laser Power Supply For Laser Engraving Machine80w power supplyHY-T80SpecificationProduct ShowcaseOperation Instruction1.Laser Tube connection: (Refer to Power supply and laser Device's connection Diagram) High voltage terminal of HY-T60 power supply should be connected to the positive pole of CO2 laser device. Current circuit of the power supply shall be connected to negative pole (laser output terminal) of laser device, through an ampere meter or directly. 2.Connection of control signal( Refer to Power supply and control board's connection Diagram) The control signal shall be reliably connected to control terminal of the power supply HY-T60,after connecting the DAC output signal and TTL signal of external computer with the power supply, the laser device shall work as expected. If the laser lamp can not work properly, should check the control signal whether correct or not(include check the voltage specification and logic),if use PWM control as power control,make sure f≥20KHz,Amplitude (peak value) ≤5V,Check and protection switch WP connection is correct at same time. 3.Voltage of power input: HY-T60's power input of the power supply shall be 220VAC/50Hz. If 110VAC required please specify when placing order. 4.Others: A group of protection switches are also reserved for detection of water switch, fan switch,open-enclosure protection and so on.