Product Name: 60m HDMI Extender Over Single Cat5e/6, HDMI V1.3 Model NO.: YL-S60MA Condition: New Certification: RoHS, CE Lightning Protection: With Lightning Protection Standard: Standard Transmission Medium: CAT-5 Type: Signal Repeater OEM: Avaliable Video Input Support: 24/50/60fs/1080P/1080I/720p/576p/576I/480p/480I Trademark: Mealink Transport Package: Gift Box Specification: HMDI 1.4V, support3D Origin: Shenzhen, China Product Description 60m HDMI Extender by single Cat5e/6 CableFeatures:Each set includes one Sender and one Receiver.Use single UTP LAN cable(Cat 6)to substitute HDMI cable to achieve long transmission distance, the UTP Cable follows the standard of IEEE-568B.Transmission distance extends up to 60 meters under 1080P.Supports lossless compressed digital audio: Dolby True-HD, DTS-HD Master Audio.Transmit Digital Audio and Video over the CAT6 cable with zero signal loss.Data transfer speed 6.75 Gbps.DC 5V power supply.Specifications:Operating Temperature Range-5 to +35ºC(+23 to +95ºF)Operating Humidity Range5 to 90%RH (No Condensation)Input Video Signal0.5-1.0 Volts P-PInput DDC Signal5 volts p-p(TTL)Support Video FormatDTV/HDTV:480i/576i/480P/576P/720P/1080i/1080P/3D video/Bi-directional IRVideo OutputHDMI ,HDCPSupport Audio FormatDTS-HD Master Audio,Dolby true-HD etc.Transmission Distance1080P 8-bit 50m(Maximum) over single CAT5E/6 /24AWG/SolidPower consumption5watts(Maximum)Dimension (L×W×H)81.5x43.5x23mmNet Weight250g(Pair)Note1: Specifications are subject to change without notice. Mass and dimensions are approximate.Sink must support 3D video when sources is 3D device2.When in 36Bits deep color mode, we suggest set the HDMI source device to output 1080i or 720p.Package Contents:1) Main Unit: Sender & Receiver2) DC 5V 1A x2PCS 3) Operating InstructionsNOTICE:Our company reserves the right to make changes in the hardware, packaging and any accompanying documentation without prior written notice.Panel Descriptions:Sender Panel1: Red instruction power 2: Blue instruction signal3: HDMI input 4: Power input 5: CAT 6 output 6: IR-TX 7: IR-RX8:EDID copy mode: connect the display to the HDMI input port, then press the key, it'll copy the EDID to the extender; Reset EDID: press the key for 3 seconds, it'll reset the EDID to 1080P 3D stereo.Receiver Panel1: Red instruction power 2: Blue instruction signal3: HDMI output 4: Power input 5: CAT 6 input 6: IR-TX 7: IR-RXConnecting and Operating:1) Connect the HDMI signal sources (Such as PS3, STB etc) to HDMI Sender.2) Connect CAT 6 cables to both the outputs of the Sender and inputs of the Receiver. (The cables must follow the standard of EIA-TIA 568B).3) Connect the HDMI output (Such as HD-LCD, HD-DLP) into the Receiver.