Changzhou plastics factory Co., Ltd has strong technical strength, rich production experience, advanced production equipment. We strictly control the raw materials, production environment and personnel, and the production process is under strict control. The product testing requirements are higher than national standards. With self-developed production capacity, the company can manufacture a variety of products according to customer’s different needs.

 

The advanced production equipment and perfect detection tools, from raw materials to finished products, accessories, we are using professional equipment, taking 100% detection, to ensure that the finished product quality with no chink in it’s armour.

 

It is produced by blow molding process with high strength and corrosion resistance, long service life, convenient filling and excellent sealing performance. It can be widely used in chemical, petroleum, medicine, food and other industries. The quality is reliable, and the technical indexes of low temperature dropping and high temperature stacking test of the product meet the UN standard. It’s convenient for transportation and is applicable with container transportation.

 

 

 

Technical Parameter:

Brand	Article No.	Volume (L)	Dimensions (mm)	Perfusion Caliber (mm)	Raw Material	Production Process	Color
Yuan Hang	20L-inner drum (double mouth)	20	Φ280×362	24,56(double mouth)	HDPE	one-piece blow molding	Natural/Customer designated
Yuan Hang	25L-inner drum	25	Φ300×356	56	HDPE	one-piece blow molding	Natural/Customer designated
Yuan Hang	30L-A-inner drum	30	Φ280×520	56	HDPE	one-piece blow molding	Natural/Customer designated
Yuan Hang	30L-B-inner drum	30	Φ366×305	56	HDPE	one-piece blow molding	Natural/Customer designated
Yuan Hang	50L-inner drum	50	Φ364×530	56	HDPE	one-piece blow molding	Natural/Customer designated
Yuan Hang	60L-inner drum	60	Φ366×590	56	HDPE	one-piece blow molding	Natural/Customer designated
Yuan Hang	80L-inner drum	80	Φ416×600	56	HDPE	one-piece blow molding	Natural/Customer designated
Yuan Hang	200L-inner drum (double mouth)	200	Φ564×848	24,56(double mouth)	HDPE	one-piece blow molding	Natural/Customer designated

 

 

 

Properties of the plastic drum:

(1) Washing resistance, wear resistance and long life;

(2) Weather resistance, heat resistance and sunlight resistance;

(3) Good compatibility or processability with the substrates;

(4) Safe and harmless to health, with no pollution to the environment;

(5) Qualified brand new material products, uniform wall thickness, non-toxic, tasteless, acid-resistant, alkali-resistant, corrosion-resistant, good anti-swelling and sealing performance, anti-impact and strong practicability.

 

Advantages:

?1?Complete qualifications and trustworthy;

?2?Exquisite workmanship: Advanced one-piece molding technology ensures product toughness;

?3?Quality assurance: Strict process control to ensure the product's acid and alkali resistance and drop and compression resistance;

?4?Strict material selection: Strictly control the quality of raw materials, use food-grade HDPE, and add no harmful substances;

?5?Reasonable distribution of wall thickness;

?6?The drum mouth is smooth and the workmanship is meticulous;

?7?Clean production environment reflects our professionalism;

?8?High-quality and experienced R&D team;

?9?Complete quality control and testing system.

 

 

Technical Support:

?1?Infrared spectrum identification: it should be consistent with the reference spectrum;

?2?Density identification: the density of the bucket is within the specified range of value;

?3?Sealing test: no leakage, the aerator and cover shall be ventilated;

?4?Drop test: ? 50L, drop height 1.2m, bucket does not break.

≥ 50L, drop height 1.0m, bucket does not break.

A. the object to be filled is liquid (water): no damage, no cap jumping;

B. The object to be filled is solid (sand): no damage, no cap jumping.

C. Drop continuously from 1.2m, with any side of the drum to the ground, no damage, no cover falling off.

?5?Suspension test: handle and connection area not broken;

?6?Stacking test:  with the ambient temperature at 40?, stacking load specified weight, stacked for 28 days, no collapse and bottom distortion occurs;

?7?Stress cracking test: in accordance with GB13508 standard;

?8?Hygienic performance test: in accordance with GB13508 standard.

 

 

 

 

Certificate:

?1?Drug packing certificate-registration certificate for pharmaceutical packing materials and containers of the people's republic of china;

?2?Food QS certificate-national production license for industrial products (plastic containers for food);

?3?Dangerous packing certificate-quality license for exporting dangerous goods packing containers.

 

 

 

 

Product Instructions

1. Unfilled liquids shall be tested for at least 6 months.

2. Do not contain substances that react with the drum or severely weaken the drum.

3. The temperature of filling liquid should not be higher than 60?. The screw lid shall be screwed after filling liquid is cooled to normal temperature, with a torque of 25N • m ~ 30N • m being appropriate.

4. Before tightening the lid, check whether the sealing ring is installed in place and whether it falls off. When screwing the lid, aim at thread teeth to avoid leakage at drum mouth caused by slipping thread after wrong thread.

5. Liquid containing gas should adopt a closed lid of exhaust and tighten as required.

6. When the drum is filled with liquid, there must be enough space capacity.

7. When stacking drums, the internal liquid should be cooled to room temperature before proceeding stack.

8. Avoid dropping during transportation and use, and avoid collision with hard sharp objects.

9. Drums should be stored in a clean, dry, well-ventilated, flat floor warehouse, and the storage temperature of the drums is ≤40?.

10. The storage life of the drum is 2 years from the production date.

11. The inner container should be packed in a suitable outer packaging. The outer packaging must not have any protruding parts that will scratch the inner container.

 

 

 

 

 

Address: No. 23 Longhui Road, South District, Wujin High-tech Development Zone, Changzhou