Product Name: GB/T 8110 Er50-2 Solid Welding Wires Model NO.: GB/T 8110 ER50-2 Extended Length: <10mm Slag Characteristic: Acidic Flux Containing: Not Containing Flux Material: Copper / Copper Alloy Type: Rolling Wire Sample: Available Certificate: ABS,ISO,Ce,Css,TUV,Nk,BV,Gl,Lr,etc. Trademark: TOKO Transport Package: 15kg Per Package, 1ton/Pallet Specification: Diameter: 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.4mm, 1.6mm Origin: China HS Code: 83112000 Product Description GB/T 8110 ER50-2 AWS A5.18 ER70S-2BS EN 1668-W 38 3 W2TiISO 636-A-W 38 3 W2TiISO 636-B-W 49 A 3 W2Carbon Steel TIG Welding Wire IntroductionIt is TIG wires for 450 and 500MPa grade carbon steel. Good welding technical performance, all-position welding and beautiful welding performance. It has good crack resistance and higher low temperature impact toughness.ApplicationIt is mainly used for single pass welding of killed steel, semi-killed steel and rimming steel. No need gas protection at back of joint.Chemical CompositionCMnSiSPCuTiAlZrf0.0351.140.530.0040.0110.200.130.080.08Mechanical PropertiesTensile Strength Rm (MPa)Yield Strength Rel (MPa)Elongation A(%)-30°C Impact Value AKV (J)5504502685Notes:Protection gas flow requirement: The welding current is 100-200A at air flow of 7-12L/min; It is 200-300A at air flow of 12-15L/min.The extension length of the tungsten electrode should be as short as possible relative to the nozzle, and the arc length should be 1-4mm (2-4mm for welding carbon steel; 1-3mm for low alloy steel and stainless steel welding)It adopts windproof measurement while wind speed is above 1.0m/s.Strictly remove grease, rust and moisture impurities while welding.Welding linear energy directly affects mechanical properties of welding seam metal and crack resistance performance, etc which should be paid more attention to.The above points are taken into reference.